News

GD-SXT8 or GD-SXT10: Compare Two Commercial Washers with the Same Listed Width

2026.11.20

Start with the supplied dimensions

The equipment specification table lists GD-SXT8 at 8 kg and GD-SXT10 at 10 kg. Both have a stated width of 750 mm and height of 1195 mm. Their listed depths differ: 820 mm for GD-SXT8 and 865 mm for GD-SXT10. These are cabinet dimensions from the supplied sheet, not a complete installed-space allowance or a confirmation of site suitability.

Ask why the extra capacity is being considered

Describe the recorded work that leads to the comparison. Are the loads separate customer jobs, or is the business trying to accommodate a particular accepted category? Do not assume two smaller customer jobs can be combined simply because the larger model has a higher rating. Confirm textile and loading suitability through the applicable guidance rather than treating the kilogram difference as a universal acceptance rule.

Compare on the same site drawing

Place the proposed cabinet outlines on a measured drawing and add the requirements identified through the relevant installation review. The depth difference matters to the plan even though the frontage width matches. Ask for the current configuration documents before deciding that a previously planned position can take either model. Keep delivery and service-access questions separate from the cabinet-size comparison.

Write the decision as a trade-off

Record which work each candidate is intended to support and which questions remain unresolved. The supplied dimensions let a buyer describe the difference accurately, but they do not establish hourly output, consumption or an improved customer result. Ask FUDUODUO to confirm the proposed model and configuration against the project brief. Choose using the documented workload and reviewed site arrangement rather than treating equal width as equal equipment.

See the FUDUODUO commercial washer specifications alongside your model comparison.