News

15 kg or 20 kg Commercial Washer? Comparing GD-SXT15 and GD-SXT20

2026.11.18

Choosing between a 15 kg and a 20 kg commercial washer requires more than selecting the higher capacity. A laundry business should compare its usual loads, installation space and drying workflow. The GD-SXT15 and GD-SXT20 specifications provide a useful example of two machines with the same cabinet width but different depths.

Same width, different depth

GD-SXT15 is listed at 805 × 930 × 1280 mm in width × depth × height. GD-SXT20 is 805 × 1080 × 1280 mm. Moving to the 20 kg model adds 150 mm of cabinet depth while keeping the listed width and height unchanged.

Place both outlines on the store plan before deciding. Check how the deeper cabinet interacts with the opposite equipment, folding space and customer route. These are cabinet dimensions, not the complete installation envelope; service access and connections must follow the final installation drawing.

Understand the drum comparison

Both models list a 650 mm drum diameter. Drum depth is 450 mm for GD-SXT15 and 550 mm for GD-SXT20. The additional depth is relevant when considering loads, but the kilogram rating does not establish that every bulky item will fit. Check loading instructions and the textile care requirements.

Do not turn one specification into a performance promise

The listed high extraction speeds are 850 r/min for GD-SXT15 and 800 r/min for GD-SXT20. These figures alone do not predict a complete washing cycle or the subsequent drying time. Request a representative programme demonstration rather than ranking the machines by one number.

Listed motor powers are 1.5 kW and 2.2 kW respectively. Motor power is not confirmation of the complete electrical input required by every component. Obtain configuration-specific connection information for the installer.

Make the buying decision around the job

  • Identify the regular load sizes and any occasional larger loads.
  • Compare the cabinet outlines plus required service space.
  • Use confirmed programme information to assess queues.
  • Check the drying positions available after washing.
  • Record the selected configuration and acceptance test in the enquiry.

Review the FUDUODUO commercial washer specifications and send your floor plan and load requirements. A larger machine can be considered where the project needs it; the final choice should follow the actual operating requirements.